Viessmann SCU224 Información técnica descargar pdf (Pagina 4)

KWE P/N 394047 Versatronik 532 Solar/Modbus Gateway V1.0 09/2013 Technical information subject to change without notice

Mounting Versatronik Gateway—120VAC Unit

Installation

1. Mount Versatronik 532 Gateway in a

convenient location near the solar control.

Remove cover by loosening the two screws on

either side of base to release the cover.

2. Fasten base to wall using field-supplied

screws/fasteners.

3. Remove knockout and installed wire strain

relief or box connector. Removal of remaining

knockouts is required to make further

connections.

4. Once all of the 120VAC and low voltage

connections are complete and verified, reinstall

the cover from Step 1.

WARNING

When extending wire there is the possibility of

exposure to electromagnetic interference. Avoid

running wires beside or near high voltage 120/240

VAC conductors. If proximity to high voltage

conductors cannot be avoided, use stranded, twisted

pair of shield design wire. Ensure that only one end of

the shielding is grounded.

Mounting Steps

1 2 3 4 5 6 7 8 9 ... 17 18

Sin comentarios

Viessmann SCU224 Información técnica Pagina 4